TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)
2SC2500
Unit: mm
Strobe Flash Applications
Medium-Power Amplifier Applications
• High DC current gain and excellent hFE linearity : hFE (1) = 140 to 600 (VCE = 1 V, IC = 0.5 A) : hFE (2) = 70 (min), 200 (typ.), (VCE = 1 V, IC = 2 A)
• Low saturation voltage: VCE (sat) = 0.5 V (max) (IC = 2 A, IB = 50
mA)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics Symbol Rating Unit Collector-base voltage Collector-emitter voltage Emitter-base voltage
VCBO VCES VCEO VEBO
DC IC
Collector current
Pulsed
(Note 1)
Base current
Collector power dissipation Junction temperature Storage temperature range
ICP IB PC Tj Tstg
30 V 30 10
V
6 V 2 5
A
JEDEC TO-92MOD JEITA
―
0.5 A 900 mW 150 °C −55 to 150
°C
TOSHIBA 2-5J1A Weight: 0.36 g (typ.)
Note 1: Pulse test: Pulse width = 10 ms (max), duty cycle = 30% (max)
Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
12006-11-09
2SC2500 Electrical Characteristics (Ta = 25°C)
Characteristics Symbol Test Condition Min Typ. MaxUnit
Collector cut-off current Emitter cut-off current
Collector-emitter breakdown voltage Emitter-base breakdown voltage
ICBO IEBO VCEO VEBO hFE (1)
DC current gain
(Note 3)hFE (2)
Collector-emitter saturation voltage Base-emitter voltage Transition frequency Collector output capacitance
VCE (sat) VBE fT Cob
VCB = 30 V, IE = 0 VEB = 6 V, IC = 0 IC = 10 mA, IB = 0 IC = 1 mA, IC = 0 VCE = 1 V, IC = 0.5 A VCE = 1 V, IC = 2 A IC = 2 A, IB = 50 mA VCE = 1 V, IC = 2 A VCE = 1 V, IC = 0.5 A VCB = 10 V, IE = 0, f = 1 MHz
― ― 10 6 140 70
― 100― 100― ―
nA nA ― V ― V ― 600200
―
― 0.2 0.5 V ― 0.86 1.5 V ― 150 ― MHz― 27 ― pF
Note 3: hFE (1) classification A: 140 to 240, B: 200 to 330, C: 300 to 450, D: 420 to 600
Marking
C2500 Part No. (or abbreviation code)Lot No. Characteristics indicator
A line indicates lead (Pb)-free package orlead (Pb)-free finish.
22006-11-09
2SC2500
IC – VCE
5 50 4 40 Common emitter Ta = 25°C 5Common emitter VCE = 1 V IC – VBE
Collector current IC (A) 3 20 Collector current IC (A) 30 43Ta = 100°C225 −25 2 10 IB = 5 mA 1 00 0 1 2 3 4 5 6 7 100 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Collector-emitter voltage VCE (V)
Base-emitter voltage VBE (V)
hFE – IC
Collector-emitter saturation voltage VCE (sat) (V) 500 Ta = 100°C300 25 −25 0.50.3
VCE (sat) – IC
Common emitter IC/IB = 40 Ta = 100°C 25 −25 DC current gain hFE 100 0.150 Common emitter VCE = 1 V 0.0520 0.05
0.1
1 0.3 3
0.020.5 0.1 0.3 1 3 5
Collector current IC (A)
Collector current IC (A)
Safe Operating Area
PC – Ta
1000 53IC max (continuous)800 IC max (pulsed)**100 ms* 10 ms* Collector power dissipation PC (mW) Collector current IC (A) 1DC operation (Ta = 25°C) 0.50.3*: Single nonrepetitive pulse Ta = 25°C ** : Pulse width ≤ 10 ms Duty cycle ≤ 30% Ta = 25°C 0.1Curves must be derated linearly with increase in temperature. 0.05 1 10 3 0.3 400 200 0 0
20 40 60 80 100 120 140
160
Ambient temperature Ta (°C)
Collector-emitter voltage VCE (V)
32006-11-09
600 2SC2500
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
20070701-EN
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
42006-11-09
因篇幅问题不能全部显示，请点此查看更多更全内容